japanese23hdxxxxfree日本_国产免费AV片在线无码免费看_免费女人18毛片a毛片视频_特黄一区二区_97涩涩影音先锋_杏导航aⅴ福利网站

MODEL-385SURPA表面電阻測試儀 防靜電測試儀MODEL-385 表面電阻測試儀

該儀器為一臺便攜式電阻儀,規格為103歐姆/米2~1012歐姆/米,精確度為±101/2。它主要用于測量表面電阻接地電阻。在測量表面電阻的時候,只要把儀器放在測量物表面,按下紅色測試按鈕就可以了。隨后儀器便會亮起103歐姆/米2~1012歐姆/米2范圍內相應的燈或絕緣顯示。在測量接地電阻的時候,重復上述過程,同時將接地插頭插入連接接地點的插座中即可。
儀器規格:
尺寸:130mm x 70mm x 25mm
電源:9V 堿性電池
應用:防靜電車間、 檢測室使用;
 

該公司產品分類: 真空度計 日本理音 日本小野 欣銳儀器 德國Novi 德國百瑞高 臺灣泰仕TES 德國德圖testo 美國雷泰Raytek 日本加野KANOMAX 日本日置HIOKI 日本共立KYORITSU 香港希瑪SMART 德國QBL 意大利哈納HANNA 美國聯合系統 美國ESC 美國斯德克 韓國卡利安株式會社 德國喜利得HILTI

152TREK表面電阻測試儀

 

Trek's Surface Resistance Meter (Model 152) is a lightweight, portable unit designed to precisely measure surface resistance on a wide variety of of conductive, dissipative, and insulative materials. It features exceptional measurement accuracy, wide measurement ranges, and multiple probe configuration options.
Model 152 SURFACE resistance METER
The Trek Model 152 Surface Resistance Meter is designed to measure surface resistance on a wide varieties of conductive, dissipative, and insulative materials. The Model 152 employs a measurement technique which conforms to several ANSI/ESD Association standards for measuring surface resistance and surface resistivity including ANSI/ESD-STM2.1 for garments, STM4.1 for work surfaces, STM7.1 for flooring, STM11.11 for planar materials, and STM 11.13 for two point measurement. A variety of measuring probe electrode configurations are available for making surface resistance or surface resistivity measurements.
The Model 152 features exceptional measurement accuracy and wide measurement ranges of 10 E3 to 10 E13 ohms using point-to-point probes or the two-point resistance probe for small surface measurement, and 10 E4 to 10 E14 ohms/square using the concentric ring probe. Measured resistance values are clearly displayed on a high-contrast LCD display using scientific notation.
The electrode test voltage for the measurement probe(s) is switch selectable for 10 V or 100 V operation to conform to the individual requirements of the ESD Association standards and testing conditions. The selected test voltage is indicated on the LCD display.
The exclusive Trek Model 152P-CR concentric ring measuring probe contains a preamplifier which eliminates the usual noise, stray pickup, and long settling time associated with other type probe designs, therefore providing ease of operation even at very high resistance values. The Model 152 will detect the connection of the active concentric ring probe, automatically adjust the measuring range, and indicate values in ohms/square on the LCD display.
The Model 152 is light-weight and portable, and can be operated from internal batteries or connected to an AC line power source using a battery eliminator.
· Meter Measurement Capability 10 E3 to 10 E13 ohms. (extends to 10E14 ohms using the Concentric Ring probe).
· Surface Resistivity / Surface Resistance Probe Measurement Ranges
·         Concentric Ring Probe 10 E4 to 10 E14 ohms/square.
·         Point-to-Point Probes 10 E3 to 10 E13 ohms.
·         Two-Point Resistance Probe 10 E3 to 10 E13 ohms.
· Measurement Accuracy (of reading) At 25 °C ±10 °C at 20% to 70% RH:
·         Concentric Ring Probe (152P-CR) 10 E4 to 10 E13 ohms/square, ±5% of LCD reading, 10 E14 ohms/square, ±8% of LCD reading.
·         Point-to-Point Probes (152AP-5P) 10 E3 to 10 E12 ohm range, ±5% of LCD reading, 10 E13 ohm range, ±8% of LCD reading.
·         Two-Point Resistance Probe (152P-2P) 10 E3 to 10 E11 ohm range, ±5% of LCD reading, 10 E12 to 10 E13 ohm range, ±10% of LCD reading.
· Meter Probe Electrode Test Voltage User selectable for 10 V or 100 V, ±2%.
· Test Current Limit Limited to less than 13 mA in the 10 V range and less than 1.7 mA in the 100 V range.
· Test Probes (purchased separately)
·         A) Trek Model 152AP-5P 2.27 kg. (5 lb.) test probes (set of two probes) are available for performing resistance measurements per ANSI/ESD-STM4.1 standards (point-to-point or surface resistance measurements). ·         B) Trek Model 152P-CR 2.27 kg.(5 lb.) concentric ring test probe contains a preamplifier for performing surface resistance/surface resistivity measurements per ANSI/ESD-STM11-11 standards.The exclusive Trek Model 152P-CR concentric ring measuring probe contains a pre-amplifier which eliminates the usual noise, stray pick-up, and long settling time associated with other type probe designs, therefore providing ease of operation even at very high resistance values.

C) Trek Model 152P-2P probe performs resistivity measurements on surface areas too small to be measured using conventional probe

s

NK8156A絕緣材料體積表面電阻測試儀/絕緣壁厚測試儀/其它檢測儀器

 NK8156A絕緣材料體積電阻/表面電阻測試儀

產品介紹:

本系列儀器是一種直讀式的數字高阻測試儀,適用于高阻值絕緣材料、電工產品、各類元器件及電線電纜的絕緣電阻的測量,選配電極箱能測量絕緣材料的表面電阻和體積電阻。

符合標準:

符合《ASTM D257-2007體積電阻率》、《GBT 1410-2006材料體積電阻率和表面電阻率試驗方法》。

主要技術參數:

1、測試電壓: 100V250V500V1000V可選,允差:±5%

2、測量范圍:0.2×1062×109Ω.m,精度:±3%

0.2×10102×1012Ω.m,精度:±5%

0.2×10132×1015Ω.m,精度:±10%

3、測試時間:199S連續可調節

體積電阻電極箱(選配):

測試原理:用三電極系統測試絕緣材料的體積電阻和表面電阻。

測試儀和電極箱的對應端鈕連接,將被測材料的試樣置于電極箱內,將箱內紅色鍔魚夾夾住測量電極,黑色鍔魚夾夾住保護電極(電極之間千萬不能互相接觸,否則將損壞儀器)。

1)測試試樣體積電阻時,電極箱上的選擇開關置于Rv,此時箱內三電極的狀態。

2)測試試樣表面電阻時,電極箱上的選擇開關置于Rs,此時箱內三電極的狀態。

注:本儀器所涉及三電極的尺寸是依據《GB1410固體電工絕緣材料絕緣電阻、體積電阻系數和表面電阻系數試驗方法》中的規定制作的。

 

該公司產品分類: 其它試驗設備 恒溫試驗箱 電線電纜燃燒試驗機 拉力試驗機 老化試驗箱 試驗機

SWD-30表面電阻測試儀

  【產品說明】

表面電阻測試儀為一臺便攜式電阻儀。主要用于測量物體表面接地電阻。在測量表面電阻的時候,只要把儀器放在測量物體表面,按下紅色測試按鈕就可以,隨后儀器便會亮起103歐姆/21012歐姆/2范圍內相應的燈或絕緣顯示。在測量接地電阻時,重復上述過程,同時將接地插頭插入連接接地點的插座中即可。

 

表面電阻測試儀技術參數:

測試范圍:103歐姆/2

精 確 度:±10%

 

表面電阻測試儀規格:

尺寸:135mm×70mm×25mm

電源:9V堿性電池

應用:防靜電車間,檢測室使用

該公司產品分類: 其他 光電子科技產品 金屬探測器 勞保產品 工具 地質儀器 其它 物位計 液位計 流量儀表 轉速表 內窺鏡 檢測儀/校準儀 汽車檢測及外圍產品 多功能測試儀 驗電器 天平 鉗形表 示波器 電纜故障測試儀

ZY6156A絕緣材料體積電阻/表面電阻測試儀

 

ZY6156A絕緣材料體積電阻/表面電阻測試儀
 
也適用于高阻值絕緣材料、電工產品、各類元器件及電線電纜用橡膠和塑料的絕緣電阻的
測量,選配電極箱能測量絕緣材料的表面電阻和體積電阻。符合標準《ASTM D257-2007
體積電阻率》、《GBT 1410-2006材料體積電阻率和表面電阻率試驗方法》。
 
主要技術指標:
測量電壓:10V、25V、50V、100V、250V、500V、1000V可選
電阻測量范圍:1×108~2×1017Ω.m
時間設定:0~99S可調
供電電源:AC220V 50 HZ
外型尺寸:500×350×250(mm)
該公司產品分類: 電線電纜燃燒試驗機 恒溫恒濕試驗機 力學試驗機

絕緣材料體積電阻/表面電阻測試儀

ZY6156A絕緣材料體積電阻/表面電阻測試儀

也適用于高阻值絕緣材料、電工產品、各類元器件及電線電纜用橡膠和塑料的絕緣電阻的

測量,選配電極箱能測量絕緣材料的表面電阻和體積電阻。符合標準《ASTM D257-2007

體積電阻率》、《GBT 1410-2006材料體積電阻率和表面電阻率試驗方法》。

主要技術指標:

測量電壓:10V、25V、50V、100V、250V、500V、1000V可選

電阻測量范圍:1×108~2×1017Ω.m

時間設定:0~99S可調

供電電源:AC220V  50 HZ 

外型尺寸:500×350×250(mm)

該公司產品分類: 拉力試驗機

SLD-699SLD-699表面電阻測試儀

SLD-699表面電阻測試儀

 

 

產品名稱:

表面電阻測試儀(FJD)

 

 

 

 

 

品 牌:

SLD

 

型 號:

SLD-699

 

規 格:

 

產品說明:

測量范圍:103~1012Ω 顯示精度:±10% 體 積:70×25×130mm 重 量:170g

SIMCO ST-3表面電阻測試儀SIMCO ST-3表面電阻測試儀

SIMCO ST-3表面電阻測試儀

        快速,測量表面和對地電阻●輕便易用,便于操作●10個LCD顯示測試結果測試范圍:10E3~10E12 Ω/sq測量精確度:±10%

990SRM表面電阻測試儀

袖珍電阻測試器的規格為從每平方米103 Ohms到每平方米1012 Ohms,精確度為±5 Ohms。根據需要,可以為測試器提供校準證明。

最新產品

主站蜘蛛池模板: 校花高潮抽搐冒白浆视频 | 国产精品日韩AV在线播放 | 亚洲中文久久精品无码软件 | 国内免费av | 亚洲国产日韩欧美 | 国产精品国产三级国产普通话三级 | 久久一区二区三区四区 | 无遮挡h肉动漫在线观看 | 在线观看黄色免费视频 | 国产精品精品自在线拍互動交流 | 日韩欧美a级v片免费播放 | av在线毛片 | 日本色偷偷 | 亚洲精品久久av无码一区二区 | 国产日韩精品一区二区在线播放 | 成人国产一区二区精品小说 | 欧美熟乱妇 | 国产一区二区日韩一区二区 | 成全视频免费观看在线看黑人 | 日韩欧美色图 | 亚洲情视频 | 九色永久网址 | 最近免费中文字幕中文高清 | 精品国产国产综合精品 | 天天躁夜夜躁AV天天爽 | 国产成人8x人网站 | 视频在线观看一区 | 一区久久精品 | 久久人人视频 | 国产一区视频在线观看免费 | 久草在线欧美 | 亚洲激情视频免费观看 | 亚洲手机在线人成网站 | 亚洲成A人片在线观看国产 亚洲国产一区自拍 | 91精品一区二区三区综合 | 国产热99 | 国产综合精品女在线观看 | 大地资源在线观看免费动漫 | 国产在线麻豆精品观看 | 中文字幕乱码中文乱码777 | 国产在线视频2019最新视频 |